The SATLOOK Digital is a SAT-TV instrument and spectrum-analyzer. The unit is made for exact alignment and adjustment of satellite-dishes. It is intended for professional use when high accuracy and precise information are needed. It is easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn. The instrument is provided with a 4.5" B/W monitor which either shows normal SAT-TV-Channel, the frequency spectrum 920-2150MHz (or parts thereof) alt. Digital data.Menus/help-displays are shown on the LCD-screen (64x128) beside the monitor. Analog SAT-TV channels can be tuned in and viewed upon (Multistandard Video PAL, NTSC and SECAM). Audio frequencies between 5.5 - 8.5 MHz can be listened to. The spectrum can be expanded (zoom in) for correct adjustment of the polarisation ("cross-polarisation"). The instrument has very high resolution and accuracy. It presents measured data +2dB (at around 20C). SATLOOK Digital presents, under one of the sub menus, digital information like BER (bit error rate), constellationdiagram (QPSK) and S/N (signal/noise ratio). SATLOOK Digital can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The polarisation of the LNB is switchable 13V/18V and the Hi-Lo band with 22kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like switches, LNB's and actuators).The power of the instrument is supplied by a built in and rechargeable battery. Even though the instrument has a lot of functions it is still very light and flexible.

TECHNICAL SPECIFICATIONS
Input frequency 920-2150MHz, easily reduced to 250MHz (max zoom in).
Frequency display IF default. All standard LNB L.O. can be setup.
Min level in about 35 dBuV (noise).
Max level in about 90 dBuV.
Attenuation 15 dB attenuator on/off.
Display of signallevel: (analog) dB on LCD/monitor. Pitch-tone.
Accuracy: +2 dB (at +20 C).
Display of signallevel: (digital) S/N (signal/noise-ratio) BER (bit error rate) Constellation (QPSK).
TV/Audio standard: Multi TV / Audio (PAL, NTSC,SECAM).
KU-C-band selectable.
Audio bandwidth adjustable between 5.5MHz and 8.5MHz.
Input impedance 75 ohm, BNC-con.
Picture screen 4.5" monitor, B/W.
Menus on LCD 64x128.
Memory 100 spectrum pictures can be stored with name. Stored spectrum can be mixed for easy indentification of satellite "Maxhold" function.
Favourite channels: Both analog and digital frequencies can be stored (with name). Simultaneous measuring of up to 10 channels at the same time. Each channel with individual setup of 13/18V and 22kHz on/off.
PC connection RS-232 output. 13-18V power output. 22kHz tone on/off.
DiSEqC 1.0 and 1.1. Also toneburst on/off.
DiSEqC actuator built in positioner for DiSEqC 1.2, SatScan and SatSelect.
Battery rechargeable 12V, 3.5amp/hour.
Operational: About 1 hour on a fully charged battery.
Weights about 5kg incl battery.
Accessories Nylon carrying-case, power supply of 220V, 1.7amp, car-charger, BNC/F adapter.

Above specifications are subject to change without prior notice.